How to Install USB to UART Bridge Controller driver for Aruba
September 2, 2025

How to Install USB to UART Bridge Controller driver for Aruba

How to Install the CP210x USB to UART Bridge Controller driver for the Aruba 7030 Wlan on Windows 10 and Windows 11.
The Aruba 7030 WLAN controller utilizes the CP210x USB to UART chip. If you’re having trouble getting it to work on a fresh Windows 10 installation, follow these steps to install the correct drivers manually.

Today article is to Aruba “How to Install USB to UART driver”

Step 1: Download and Install USB to UART driver

https://www.silabs.com/software-and-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads

Download the CP210x USB to UART Bridge VCP Drivers for Windows 10 directly from SiLabs.
Run the installer to install the drivers on your computer.

 

Install-the-Driver
Step 1 Install the Drivers

 

 

Step 2: Locate the Device in Device Manager


>>>>Open Device Manager.
• Look for the “Aruba Networks USB to UART Bridge controller” listed under “Other Devices.”
• Right-click on it and select “Properties.”

 

Device-in-Device-Manager
Device in Device Manager.

 

Step 3: Update the Driver Manually

In the Properties window, click on the “Update Driver” button.
• Choose “Browse my computer for drivers.”
• Next, click on “Let me pick from a list of available drivers on my computer.”

 

USB to UART Bridge Controller driver manual installation
USB to UART Bridge Controller driver manual installation

 


Step 4: Select the Correct Driver from the List

• From the list of hardware types, select “Ports (COM & LPT).”

 

Port (COM & LPT)
Port (COM & LPT) drivers

 


>>>>   • On the next screen, select “Silicon Labs” from the “Manufacturer” list on the left.
• From the “Model” list on the right, choose “Silicon Labs CP210x USB to UART Bridge.”

Silicon labs CP210x USB to UART bridge driver installation
Silicon labs CP210x USB to UART bridge driver installation

 

Step 5: Complete the Installation

• A warning will appear stating that Windows cannot verify the compatibility of the driver. You can safely ignore this. Click “Yes” or “Continue” to proceed.

• A success message should now appear, indicating that the driver has been installed correctly.

 

How to Install USB to UART Bridge Controller driver for Aruba
How to Install the CP210x USB to UART Bridge Controller driver for the Aruba 7030

Step 6: Connect to the Device

Note the COM port number assigned to the device in Device Manager.

Open your preferred terminal emulator (such as PuTTY) and connect using the noted COM port number to communicate with the Aruba 7030 wireless controller.

 

 

This Article was related to the Install of the USB to UART Bridge Controller driver for the Aruba 7030 wireless controller”

Admin: Faiq khan

Read more posts here Tiktikdown.com

 

Leave a Reply

Your email address will not be published. Required fields are marked *